Show Slaveslot0 - Cisco 4500M Command Reference Manual

show slaveslot0:

show slaveslot0:
To display information about the file system on the standby supervisor engine, use the show slaveslot0:
command.
Syntax Description
all
chips
filesys
Defaults
This command has no default settings.
Command Modes
EXEC
Command History Release
12.1(8a)EW
Examples
This example shows how to display a summary of the file system:
Switch> show slaveslot0:
-# - ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name
1
5705404 bytes available (10678596 bytes used)
Switch>
This example shows how to display Flash chip information:
Switch> show slaveslot0: chips
******** Intel Series 2+ Status/Register Dump ********
ATTRIBUTE MEMORY REGISTERS:
Config Option Reg (4000): 2
Config Status Reg (4002): 0
Card Status
Write Protect Reg (4104): 4
Voltage Cntrl Reg (410C): 0
Rdy/Busy Mode Reg (4140): 2
COMMON MEMORY REGISTERS: Bank 0
Intelligent ID Code
Compatible Status Reg: 8080
Global
Block Status Regs:
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-380
show slot0: [all | chips | filesys]
(Optional) Displays all Flash information including the output from the show slot0:
chips and show slot0: filesys commands.
(Optional) Displays Flash chip register information.
(Optional) Displays file system status information.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
.. image 6375DBB7 A4F144
Reg (4100): 1
: 8989A0A0
Status Reg: B0B0
0 : B0B0 B0B0 B0B0
8 : B0B0 B0B0 B0B0
16 : B0B0 B0B0 B0B0
24 : B0B0 B0B0 B0B0
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
6 10678468 Nov 09 1999 10:50:42 halley
B0B0 B0B0 B0B0 B0B0
B0B0 B0B0 B0B0 B0B0
B0B0 B0B0 B0B0 B0B0
B0B0 B0B0 B0B0 B0B0
B0B0
B0B0
B0B0
B0B0
78-16201-01