Show Environment - Cisco 4500M Command Reference Manual

show environment

show environment
To display environment alarm, operational status, and the current reading for the chassis, use the show
environment command.
Syntax Description
alarm
status
chassis
fantray
powersupply
supervisor
temperature
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
12.1(12c)EW
Examples
This example shows how to display information about environment alarms, operational status, and the
current temperature readings for the chassis:
Switch# show environment
no alarm
Chassis Temperature
Chassis Over Temperature Threshold
Chassis Critical Temperature Threshold = 95 degrees Celsius
Power
Supply
------
PS1
PS2
Power Supply
(Nos in Watts)
--------------
PS1
PS2
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-258
show environment [alarm ] | [status [chassis | fantray | powersupply | supervisor ]] |
[temperature]
(Optional) Specifies alarm status of the chassis.
(Optional) Specifies operational status information.
(Optional) Specifies operational status of the chassis.
(Optional) Specifies status of the fan tray, and shows fan tray power consumption.
(Optional) Specifies status of the power supply.
(Optional) Specifies status of the supervisor engine.
(Optional) Specifies current chassis temperature readings.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Support for the ability to display generic environment information with the show
environment command was added.
Model No Type
--------------- ---------
PWR-C45-1400AC AC 1400W
none --
Max Min
Inline Inline
------ ------
0
-- --
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
= 32 degrees Celsius
= 75 degrees Celsius
Fan
Status Sensor
----------- ------
good good
-- --
Max Min Absolute
System System Maximum
------ ------ --------
0 1360 1360 1400
-- -- --
78-16201-01