arp access-list
arp access-list
To define an ARP access list or add clauses at the end of a predefined list, use the arp access-list
command.
Syntax Description
name
Defaults
None
Command Modes
Configuration
Command History
Release
12.1(19)EW
Examples
The following example shows how to define an ARP access list named static-hosts:
Switch(config)# arp access-list static-hosts
Switch(config)#
Related Commands
deny
ip arp inspection filter vlan
permit
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-8
arp access-list name
Specifies the access control list name.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2
Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01