Renew Ip Dhcp Snooping Database - Cisco 4500M Command Reference Manual

renew ip dhcp snooping database

renew ip dhcp snooping database
To renew the DHCP binding database, use the renew ip dhcp snooping database command.
Syntax Description
validation none
url
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(19)EW
Usage Guidelines
If the URL is not provided, the switch tries to read the file from the configured URL.
Examples
This example shows how to renew the DHCP binding database, while bypassing the CRC checks:
Switch# renew ip dhcp snooping database validation none
Switch#
Related Commands
ip dhcp snooping
ip dhcp snooping binding
ip dhcp snooping information option
ip dhcp snooping trust
ip dhcp snooping vlan
show ip dhcp snooping
show ip dhcp snooping binding
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-232
renew ip dhcp snooping database [validation none ] [url]
(Optional) Specifies that the checksum associated with the contents of the file
specified by the URL is not verified.
(Optional) Specifies the file from which the read is performed.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01