Storm-Control Broadcast Include Multicast - Cisco 4500M Command Reference Manual

storm-control broadcast include multicast

storm-control broadcast include multicast
To enable multicast storm control on a port, use the storm-control broadcast include multicast
command. Use the no form of this command to disable multicast storm control.
Syntax Description
This command has no arguments or keywords.
Defaults
Multicast storm control is disabled.
Command Modes
Global configuration
Command History Release
12.2(18)EW
Usage Guidelines
This command prompts the hardware to filter multicast packets if it is already filtering broadcast packets.
Examples
This example shows how to enable multicast storm control globally:
Switch(config)# storm-control broadcast include multicast
Switch(config)#
Related Commands
storm-control
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-456
storm-control broadcast include multicast
no storm-control broadcast include multicast
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01