Qos Cos - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

qos cos

To define the default CoS value for an interface
the no form of this command.
Syntax Description
cos_value
Defaults
The default CoS value is 0.
Note
CoS override is not configured.
Command Modes
Interface configuration
Command History Release
12.1(8a)EW
Usage Guidelines
CoS values are configurable on physical LAN ports only.
Examples
This example shows how to configure the default QoS CoS value as 6:
Switch(config-if)# qos cos 6
Switch(config-if)#
Related Commands
show qos
78-16201-01
qos cos cos_value
no qos cos cos_value
Default CoS value for the interface; valid values are from 0 to 7.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
use the qos cos command. To remove a prior entry, use
,
qos cos
2-215