Show Ip Dhcp Snooping Database - Cisco 4500M Command Reference Manual

show ip dhcp snooping database

show ip dhcp snooping database
To display the status of DHCP snooping database agent, use the show ip dhcp snooping database
command.
Syntax Description
detail
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(12c)EW
12.1(19)EW
Examples
This example shows how to display the DHCP snooping database:
Switch# show ip dhcp snooping database
Agent URL :
Write delay Timer : 300 seconds
Abort Timer : 300 seconds
Agent Running : No
Delay Timer Expiry : Not Running
Abort Timer Expiry : Not Running
Last Succeded Time : None
Last Failed Time : None
Last Failed Reason : No failure recorded.
Total Attempts
Successful Transfers :
Successful Reads
Successful Writes
Media Failures
Switch#
This example shows how to view additional operating statistics:
Switch# show ip dhcp snooping database detail
Agent URL : tftp://10.1.1.1/directory/file
Write delay Timer : 300 seconds
Abort Timer : 300 seconds
Agent Running : No
Delay Timer Expiry : 7 (00:00:07)
Abort Timer Expiry : Not Running
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-304
show ip dhcp snooping database [detail]
(Optional) Provides additional operating state and statistics information.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Added support of state and statistics information.
:
:
:
:
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
0 Startup Failures :
0 Failed Transfers :
0 Failed Reads :
0 Failed Writes :
0
0
0
0
0
78-16201-01