Debug Redundancy - Cisco 4500M Command Reference Manual

debug redundancy

debug redundancy
To debug supervisor redundancy, use the debug redundancy command. To disable debugging output,
use the no form of this command.
Syntax Description
errors
fsm
kpa
msg
progression
status
timer
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(12c)EW
Examples
This example shows how to debug redundancy facility timer event debugging:
Switch# debug redundancy timer
Redundancy timer debugging is on
Switch#
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-64
debug redundancy {errors | fsm | kpa | msg | progression | status | timer}
no debug redundancy
Enables redundancy facility for error debugging.
Enables redundancy facility for FSM event debugging.
Enables redundancy facility for keepalive debugging.
Enables redundancy facility for messaging event debugging.
Enables redundancy facility for progression event debugging.
Enables redundancy facility for status event debugging.
Enables redundancy facility for timer event debugging.
Modification
Support for this command was introduced on the Catalyst 4500 series switch
(Catalyst 4507R only).
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01