Spanning-Tree Mst Max-Hops - Cisco 4500M Command Reference Manual

spanning-tree mst max-hops

spanning-tree mst max-hops
To specify the number of possible hops in the region before a BPDU is discarded, use the spanning-tree
mst max-hops command. To return to the default settings, use the no form of the command.
Syntax Description
hopnumber
Defaults
Number of hops i s 20.
Command Modes
Global configuration
Command History Release
12.1(12c)EW
Examples
This example shows how to set the number of possible hops in the region before a BPDU is discarded to 25:
Switch(config)# spanning-tree mst max-hops 25
Switch(config)#
Related Commands
show spanning-tree mst
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-436
spanning-tree mst max-hops hopnumber
no spanning-tree mst max-hops
Number of possible hops in the region before a BPDU is discarded; valid values are from
1 to 40 hops.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01