Switchport Private-Vlan Trunk Native Vlan - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

switchport private-vlan trunk native vlan

To control the tagging of native VLAN traffic on 802.1Q private VLAN trunks, use the switchport
private-vlan trunk native vlan tag command. To remove the control of tagging (and default to the global
setting), use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults
The default setting is global; the settings on the port are determined by the global setting.
Command Modes
Interface configuration
Command History Release
12.1(12c)EW
12.2(18)EW
Usage Guidelines
The configuration created with this command only applies to ports that are configured as private VLAN
trunks.
Examples
This example shows how to enable 802.1Q native VLAN tagging on a PVLAN trunk:
Switch(config-if)# switchport private-vlan trunk native vlan tag
Switch(config-if)#
Related Commands
show interfaces switchport
switchport mode
78-16201-01
switchport private-vlan trunk native vlan tag
no switchport private-vlan trunk native vlan tag
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Removed vlan-id keyword.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
switchport private-vlan trunk native vla n
2-473