Clear Counters - Cisco 4500M Command Reference Manual

clear counters

clear counters
To clear interface counters, use the clear counters command.
Syntax Description
FastEthernet interface_number
GigabitEthernet interface_number
null interface_number
port-channel number
vlan vlan_id
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
12.1(12c)EW
Usage Guidelines
This command clears all the current interface counters from all interfaces unless you specify an
interface.
Note
This command does not clear counters retrieved using SNMP, but only those seen when you enter the
show interface counters command.
Examples
This example shows how to clear all interface counters:
Switch# clear counters
Clear "show interface" counters on all interfaces [confirm] y
Switch#
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-20
clear counters [{FastEthernet interface_number} | {GigabitEthernet interface_number} |
{null interface_number} | {port-channel number} | {vlan vlan_id}]
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Support for extended VLAN addresses was added.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
(Optional) Specifies the Fast Ethernet interface; valid values
are from 1 to 9.
(Optional) Specifies the Gigabit Ethernet interface; valid values
are from 1 to 9.
(Optional) Specifies the null interface; the valid value is 0.
(Optional) Specifies the channel interface; valid values are
from 1 to 64.
(Optional) Specifies the VLAN; valid values are from 1 to
4096.
78-16201-01