Show Vlan Dot1Q Tag Native - Cisco 4500M Command Reference Manual

show vlan dot1q tag native

show vlan dot1q tag native
To display all the ports on the switch that are eligible for native VLAN tagging as well as their current
native VLAN tagging status, use the show vlan dot1q tag native command.
Syntax Description
This command has no arguments or keywords.
Command Modes
User EXEC
Command History Release
12.1(18)EW
Examples
This is an example of output from the show vlan dot1q tag native command:
Switch> show vlan dot1q tag native
dot1q native vlan tagging is disabled globally
Per Port Native Vlan Tagging State
----------------------------------
Port
------------------------------------
f3/2
f3/16
f3/16
Related Commands
switchport mode
vlan (global configuration) (refer to Cisco IOS documentation)
vlan (VLAN configuration) (refer to Cisco IOS documentation)
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-402
show vlan dot1q tag native
Modification
This command was introduced on the Catalyst 4500 series switch.
Operational Native VLAN
Mode Tagging State
trunk enabled
PVLAN trunk disabled
trunk enabled
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01