Debug Ipc - Cisco 4500M Command Reference Manual

debug ipc

debug ipc
To debug IPC activity, use the debug ipc command. To disable debugging output, use the no form of this
command.
Syntax Description
all
errors
events
headers
packets
ports
seats
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(12c)EW
Examples
This example shows how to enable debugging of IPC events:
Switch# debug ipc events
Special Events debugging is on
Switch#
Related Commands
undebug ipc (same as no debug ipc)
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-52
debug ipc {all | errors | events | headers | packets | ports | seats}
no debug ipc {all | errors | events | headers | packets | ports | seats}
Enables all IPC debugging.
Enables IPC error debugging.
Enables IPC event debugging.
Enables IPC header debugging.
Enables IPC packet debugging.
Enables debugging of the creation and deletion of ports.
Enables debugging of the creation and deletion of nodes.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01