Show Storm-Control - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show storm-control

To display broadcast storm control settings on the switch or on the specified interface, use the show
storm-control user EXEC command.
Syntax Description
interface-id
broadcast
Command Modes
Privileged EXEC
Command History Release
12.1(19)EW
Usage Guidelines
When you enter an interface ID, the storm control thresholds are displayed for the specified interface.
If you do not enter an interface ID, settings are displayed for broadcast traffic type for all ports on the
switch.
Examples
This is an example of output from the show storm-control command when no keywords are entered.
Because no traffic type keyword was entered, the broadcast storm control settings are displayed.
Switch# show storm-control
Interface
---------
Gi2/1
Gi4/1
Gi4/3
This is an example of output from the show storm-control command for a specified interface. Because
no traffic type keyword was entered, the broadcast storm control settings are displayed.
Switch# show storm-control fastethernet2/17
Interface
---------
Fa2/17
78-16201-01
show storm-control [interface-id | broadcast]
(Optional) Specifies the interface ID for the physical port.
(Optional) Displays broadcast storm threshold setting.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Filter State Upper
------------- -------
Forwarding
Forwarding
Forwarding
Filter State Level
------------- -------
Forwarding
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
Lower Current
------- -------
30.00% 30.00% N/A
30.00% 30.00% N/A
30.00% 30.00% N/A
Current
-------
50.00% 0.00%
show storm-control
2-391