Show Class-Map - Cisco 4500M Command Reference Manual

show class-map

show class-map
To display class map information, use the show class-map command.
Syntax Description
class_name
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
Examples
This example shows how to display class map information for all class maps:
Switch# show class-map
Class Map match-any class-default (id 0)
Match any
Class Map match-any class-simple (id 2)
Match any
Class Map match-all ipp5 (id 1)
Match ip precedence 5
Class Map match-all agg-2 (id 3)
Switch#
This example shows how to display class map information for a specific class map:
Switch# show class-map ipp5
Class Map match-all ipp5 (id 1)
Match ip precedence 5
Switch#
Related Commands
class-map
show policy-map
show policy-map interface
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-246
show class-map class_name
Name of the class map.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01