Show Mac-Address-Table Vlan - Cisco 4500M Command Reference Manual

show mac-address-table vlan

show mac-address-table vlan
To display MAC address table information for a specific VLAN, use the show mac-address-table vlan
command.
Syntax Description
vlan vlan_id
protocol protocol
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
12.1(12c)EW
Usage Guidelines
For MAC address table entries used by routed ports, the routed port name is displayed in the "vlan"
column rather than the internal VLAN number.
The keyword definitions for the protocol variable are as follows:
•
•
•
•
Examples
This example shows how to display MAC address table information for a specific VLAN:
Switch# show mac-address-table vlan 1
Unicast Entries
vlan
-------+---------------+--------+---------------------+--------------------
1
1
1
1
1
Multicast Entries
vlan
-------+---------------+-------+-------------------------------------------
1
Switch#
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-350
show mac-address-table [vlan vlan_id] [protocol protocol]
(Optional) Displays entries for a specific VLAN; valid values are from 1 to 4094.
(Optional) Specifies a protocol. See "Usage Guidelines" for more information.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Support for extended addressing was added.
assigned specifies assigned protocol entries.
ip specifies IP protocol.
ipx specifies IPX protocols.
other specifies other protocol entries.
mac address type
0000.0000.0201 dynamic ip
0000.0000.0202 dynamic ip
0000.0000.0203 dynamic other
0000.0000.0204 dynamic other
0030.94fc.0dff static ip,ipx,assigned,other
mac address type
ffff.ffff.ffff system Switch,Fa6/15
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
protocols
ports
port
FastEthernet6/15
FastEthernet6/15
FastEthernet6/15
FastEthernet6/15
Switch
78-16201-01