Show Mac-Address-Table Address - Cisco 4500M Command Reference Manual

show mac-address-table address

show mac-address-table address
To display MAC address table information for a specific MAC address, use the show mac-address-table
address command.
Syntax Description
mac_addr
interface type slot/port
protocol protocol
vlan vlan_id
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
12.1(12c)EW
Usage Guidelines
For MAC address table entries used by routed ports, the routed port name is displayed in the "vlan"
column rather than the internal VLAN number.
The keyword definitions for the protocol variable are as follows:
•
•
•
•
Examples
This example shows how to display MAC address table information for a specific MAC address:
Switch# show mac-address-table address 0030.94fc.0dff
Unicast Entries
vlan
-------+---------------+--------+---------------------+--------------------
1
Fa6/1
Fa6/2
Switch#
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-336
show mac-address-table address mac_addr [interface type slot/port | protocol protocol | vlan
vlan_id]
48-bit MAC address; the valid format is H.H.H.
(Optional) Displays information for a specific interface; valid values for
type are FastEthernet and GigabitEthernet.
(Optional) Specifies a protocol. See "Usage Guidelines" for more
information.
(Optional) Displays entries for the specific VLAN only; valid values are
from 1 to 4094.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Added support for extended VLAN addresses.
ip specifies IP protocol.
ipx specifies IPX protocols.
assigned specifies assigned protocol entries.
other specifies other protocol entries.
mac address type
0030.94fc.0dff static ip,ipx,assigned,other
0030.94fc.0dff static ip,ipx,assigned,other
0030.94fc.0dff static ip,ipx,assigned,other
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
protocols
Switch
Switch
Switch
port
78-16201-01