Revision - Cisco 4500M Command Reference Manual

revision

revision
To set the MST configuration revision number, use the revision command. To return to the default
settings, use the no form of this command.
Syntax Description
version
Defaults
Revision version is set to 0.
Command Modes
MST configuration
Command History Release
12.1(12c)EW
Usage Guidelines
If two Catalyst 4500 series switches have the same configuration but have different configuration
revision numbers, they are considered to be part of two different regions.
Caution
Be careful when using the revision command to set the MST configuration revision number because a
mistake can put the switch in a different region.
Examples
This example shows how to set the configuration revision number:
Switch(config-mst)# revision 5
Switch(config-mst)#
Related Commands
instance
name
show spanning-tree mst
spanning-tree mst configuration
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-234
revision version
no revision
Configuration revision number; valid values are from 0 to 65535.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01