Show Idprom - Cisco 4500M Command Reference Manual

Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show idprom

To display IDPROMs for the chassis, supervisor engine, module, power supplies, fan trays, clock module,
and multiplexor (mux) buffer, use the show idprom command.
Syntax Description
all
chassis
module
mod
interface int_name
supervisor
power-supply number
fan-tray
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
12.1(12c)EW
12.1(13)EW
12.2(18)EW
Usage Guidelines
When you enter the show idprom interface command, the output lines for Calibration type and Rx
(receive) power measurement may not be displayed for all GBICs.
Examples
This example shows how to display IDPROM information for module 4:
Switch# show idprom module 4
Module 4 Idprom:
Common Block Signature = 0xABAB
Common Block Version = 1
Common Block Length = 144
Common Block Checksum = 4199
Idprom Size = 256
Block Count = 2
78-16201-01
show idprom {all | chassis | module [mod] | interface int_name | supervisor | power-supply
number | fan-tray}
Displays information for all IDPROMs.
Displays information for chassis IDPROMs.
Displays information for module IDPROMs.
(Optional) Specifies the module name.
Displays information for GBIC or SFP IDPROMs.
Displays information for supervisor engine IDPROMs.
Displays information for power supply IDPROMs.
Displays information for the fan tray IDPROMs.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Support for the power-supply , fan-tray, clock-module, and mux-buffer keywords
was added.
Support for interface keyword was added.
Enhanced the show idprom interface output to include the hexadecimal display of
the GBIC/SFP SEEPROM contents.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
show idprom
2-269