Show Mac-Address-Table Protocol - Cisco 4500M Command Reference Manual

show mac-address-table protocol

show mac-address-table protocol
To display MAC address table information based on the protocol, use the show mac-address-table
protocol command.
Syntax Description
assigned
ip
ipx
other
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
Usage Guidelines
For MAC address table entries used by routed ports, the routed port name is displayed in the "vlan"
column rather than the internal VLAN number.
Examples
This example shows how to display MAC address table entries that have a specific protocol type (in this
case, assigned):
Switch# show mac-address-table protocol assigned
vlan
-----+---------------+--------+---------+---+--------------------------------
200
100
5
4092
1
4
4092
4092
1
Switch#
This example shows the other output for the previous example:
Switch# show mac-address-table protocol other
Unicast Entries
vlan
-------+---------------+--------+---------------------+--------------------
1
1
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-346
show mac-address-table protocol {assigned | ip | ipx | other}
Specifies assigned protocol entries.
Specifies IP protocol entries .
Specifies IPX protocol entries.
Specifies other protocol entries.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
mac address type
0050.3e8d.6400 static
0050.3e8d.6400 static
0050.3e8d.6400 static
0000.0000.0000 dynamic
0050.3e8d.6400 static
0050.3e8d.6400 static
0050.f0ac.3058 static
0050.f0ac.3059 dynamic
0010.7b3b.0978 dynamic
mac address type
0000.0000.0201 dynamic other
0000.0000.0202 dynamic other
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
protocol qos
assigned -- Switch
assigned -- Switch
assigned -- Switch
assigned -- Switch
assigned -- Switch
assigned -- Switch
assigned -- Switch
assigned -- Switch
assigned -- Fa5/9
protocols
ports
port
FastEthernet6/15
FastEthernet6/15
78-16201-01