Show Monitor - Cisco 4500M Command Reference Manual

show monitor

show monitor
To display SPAN session information, use the show monitor command.
Syntax Description
session
range
session-range
local
remote
all
session-number
detail
Defaults
The detail keyword only displays lines with a nondefault configuration.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
12.1(13)EW
12.1(19)EW
12.1(20)EW
Examples
This example shows how to display SPAN information for session 2:
Switch# show monitor session 2
Session 2
------------
Type : Remote Source Session
Source Ports:
Dest RSPAN VLAN:
Ingress : Enabled, default VLAN=2
Learning : Disabled
Switch#
This example shows how to display detailed SPAN information for session 1:
Switch# show monitor session 1 detail
Session 1
---------
Type
Source Ports
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-354
show monitor [session] [range session-range | local | remote | all | session-number ] [detail]
(Optional) Displays SPAN information for a session.
(Optional) Displays information for a range of sessions.
(Optional) Specifies a range of sessions.
(Optional) Displays all local SPAN sessions.
(Optional) Displays RSPAN source and destination sessions.
(Optional) Displays SPAN and RSPAN sessions.
(Optional) Specifies a session number; valid values are from1 to 6.
(Optional) Displays detailed SPAN information for a session.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Added support for differing directions within a single user session.
Output enhanced to display configuration status of SPAN enhancements.
Added support to display configuration state for remote SPAN and learning.
RX Only: Fa1/1-3
901
: Local Session
:
RX Only : None
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01