Chapter2
Cisco IOS Commands for the Catalyst 4500 Series Switches
remote-span
To convert a VLAN into an RSPAN VLAN, use the remote-span command. To convert an RSPAN
VLAN to a VLAN, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
RSPAN is disabled.
Command Modes
VLAN configuration
Command History
Release
12.1(20)EW
Examples
This example shows how to convert a VLAN into an RSPAN VLAN:
Switch# config terminal
Switch(config)# vlan 20
Switch(config-vlan)# remote-span
Switch(config-vlan)# end
Switch#
Related Commands
monitor session
78-16201-01
remote-span
no remote-span
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
remote-span
2-231