Entry Monitor - Mitsubishi Electric GOT2000 Series User Manual

3.4

Entry Monitor

The entry monitor is a function that registers the devices to monitor beforehand and monitors only the registered devices.
■1. Screen display and the key function
1)
2)
6)
7)
1) Monitor category display
Displays a monitor category of the monitor screen that is currently displayed.
2) Monitor category change key
Use this button to select a monitor category.
Select from [Series], [TC monitor], and [BM monitor].
3) Screen switching key ([4 screens], [One large screen])
Switches the screen display between the full screen display and the quad screen display.
4) [Exit] key
Exits the device monitor.
5) Monitor target display
Displays the channel No., network No., station No., and CPU No. of the monitor target.
6) Monitor device display area
Displays the monitor device display area.
Device number
Device name
Device comment
Device value
Device name
Device comment
Device name
Device number
Device comment
Device value
3 - 36
3.4 Entry Monitor
9) 10)
8) 11)
Item
Displays the device name of the monitor device.
Displays the device number of the monitor device.
Displays the device comment set for the monitor device.
Displays the device value of the monitor device.
If a bit device is the target, the status is indicated as shown below.
• ●: Bit ON
• ○: Bit OFF
14)
12) 13)
15)
Device value
Bit device
Device value
Word device
Description
3)
4)
5)
Display format