Operation Procedures; System Configuration Screen Layout - Mitsubishi Electric GOT2000 Series User Manual

7.4

Operation Procedures

This section explains screen operations to be performed when using the Q motion monitor.
The display screen of the Q motion monitor varies depending on the GOT used.
➠

7.4.1 System configuration screen layout

7.4.2 Setting method for other station monitoring
7.4.3 Monitor Menu screen
7.4.4 Present Value Monitor screen
7.4.5 SFC Error History screen
7.4.6 Error List screen
7.4.7 Error List Designated-Axis screen
7.4.8 Positioning Monitor screen
7.4.9 Servo Monitor screen
7.4.10 Present Value History Monitor screen
7.4.11 Parameter setting screen
7.4.12 Hard copy output
7.4.1 System configuration screen layout
This section describes the structure of the screen and the common operations when the Q motion monitor is executed.
■1. Display contents and key functions
This section describes the configuration of the System Configuration screen that is displayed after startup of the Q
motion monitor and the functions of the keys displayed on the screen.
(1) Displayed contents
1) Motion controller CPU status display
The CPU numbers are displayed for CPUs and the control CPU number for the installed module.
To choose the motion controller CPU for servo monitor/servo parameter setting, touch the respective display
position.
2) Touch key
Displays the keys used with the operation on the System Configuration screen.(Touch input)
1)
2)
2) 2)
2)
2)
7.4 Operation Procedures
7
7 - 9