Operations For Display - Mitsubishi Electric GOT2000 Series User Manual

20.3 Operations for Display

The following explains how to display the CNC monitor 2 screen after the GOT is turned on.
Step 1.
Turn on the GOT.
Step 2.
Display the CNC monitor 2 screen.
The display methods include the following two types.
• Using the special function switch (CNC monitor 2) set in the project
For how to set the special function switch, refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
• Starting from the utility
In the utility, touch [Monitor] → [CNC monitor2] from the main menu.
For how to display the utility, refer to the following.
➠ GOT2000 Series User's Manual (Utility)
Step 3.
Set the channel number of the controller for which the CNC monitor 2 is performed.
After the GOT is turned on, the communication setting window is displayed automatically only at the first
startup of the CNC monitor 2.
To display the communication setting window after the first startup, touch the [Ch:] key on the CNC monitor
2 screen.
For the details of the CNC monitor 2 screen operations, refer to the following.
➠ 20.4 Operating Procedure
Step 4.
Start the CNC monitor 2.
The CNC monitor 2 screen appears after the channel number is selected.
Communication setting window
20.3 Operations for Display
20
20 - 5