Specifications; System Configuration - Mitsubishi Electric GOT2000 Series User Manual

■2. Enabled data change by write operations
The values are written into the buffer memory of the intelligent function module by writing values from the monitor
screen.
Monitor screen
8.2

Specifications

➠
8.2.1

System configuration

This section describes the system configuration of the intelligent module monitor.
For connection type settings and precautions regarding the communication unit, cable and connection type, refer to the
following.
➠
■1. Targeted equipments for the intelligent module monitor
(1) PLC CPU
PLC CPU and motion controller CPU
RCPU
QCPU
Motion controller CPU (Q series)
C Controller module (Q Series)
QSCPU
LCPU
*1
8 - 2
8.2 Specifications
8.2.1 System configuration
8.2.2 Access range
8.2.3 Precautions
GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3 Version1
*1
Only the PLC CPU area (CPU No.1) can be monitored.
The PERIPHERAL I/F does not support the Ethernet connection.
Select writing
R04CPU, R08CPU, R16CPU, R32CPU, R120CPU,
R04ENCPU, R08ENCPU, R16ENCPU, R32ENCPU, R120ENCPU
Q00JCPU, Q00CPU, Q01CPU,
Q02CPU, Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU,
Q02PHCPU, Q06PHCPU, Q12PHCPU, Q25PHCPU,
Q12PRHCPU, Q25PRHCPU
Q03UDVCPU, Q04UDVCPU, Q06UDVCPU, Q13UDVCPU, Q26UDVCPU, Q04UDPVCPU,
Q06UDPVCPU, Q13UDPVCPU, Q26UDPVCPU
Q00UJCPU, Q00UCPU, Q01UCPU,
Q02UCPU, Q03UDCPU, Q04UDHCPU, Q06UDHCPU, Q10UDHCPU, Q13UDHCPU,
Q20UDHCPU, Q26UDHCPU,
Q03UDECPU, Q04UDEHCPU, Q06UDEHCPU, Q10UDEHCPU, Q13UDEHCPU,
Q20UDEHCPU, Q26UDEHCPU, Q50UDEHCPU, Q100UDEHCPU
Q170MCPU, Q170MCPU-S1, Q170MSCPU, Q170MSCPU-S1
Q12DCCPU-V, Q24DHCCPU-V, Q24DHCCPU-VG, Q24DHCCPU-LS, Q26DHCCPU-LS
QS001CPU
L02CPU, L06CPU, L26CPU, L26CPU-BT, L02CPU-P, L06CPU-P, L26CPU-P, L26CPU-PBT,
L02SCPU, L02SCPU-P
When changing a change-permitted channel
Model