Intelligent Module Monitor Screens; Operating I/O Module Monitor Screen; Specifying The Module To Be Monitored - Mitsubishi Electric GOT2000 Series User Manual

8.5

Intelligent Module Monitor Screens

To display the intelligent module monitor screen on the GOT, write special data (intelligent module monitor data) to be
monitored.
For the capacity of the special data to be written to the GOT and the writing procedure, refer to the following.
➠
8.2.1 System configuration
The intelligent module monitor screen differs depending on the connected module.
This section describes the screen using a typical intelligent module monitor screen.
The screen configuration may differ depending on the intelligent module monitor used.
For the buffer memory address of the module and others, refer to the following.
➠
User's Manual of the intelligent function module used
• Example) QD73A1 Positioning & Parameter Data Monitor Screen
8.6

Operating I/O Module Monitor Screen

This section describes the operation of the various screens in the intelligent module monitor function, when monitoring input
or output modules.
➠

8.6.1 Specifying the module to be monitored

8.6.2 Monitor screen configuration and key functions
8.6.1 Specifying the module to be monitored
This section describes how to start monitoring for an input or output module with the intelligent module monitor function.
Step 1.
Display the System Configuration screen.
➠
8.4.1 Composition of the system configuration screen and key functions
Step 2.
Touch the display position of a module to be monitored.
From among the modules installed in the corresponding base unit, specify the module whose Input or
Output is displayed.
For specifying an intelligent function module, refer to the following.
➠ 8.4.1 Composition of the system configuration screen and key functions
8.5 Intelligent Module Monitor Screens
8
8 - 35