Specifying A Module To Monitor And Selecting Monitor Menu - Mitsubishi Electric GOT2000 Series User Manual

8.4.6

Specifying a module to monitor and selecting monitor menu

This section uses the positioning module as an example to describe the operations when starting the intelligent module
monitor to monitor a desired module.
Step 1.
Display System Configuration screen.
➠
Step 2.
Touch the display position of a module to be monitored to specify the module.
From among the modules installed in the corresponding base unit, specify the intelligent function module
whose format is displayed.
To monitor any module whose model name is not displayed, use the device monitor.
➠
For specifying an input module or output module, refer to the following.
➠
Step 3.
Display screen that shows monitor menu.
Specify the menu corresponding to the type of data to be monitored.
Step 4.
Display monitor screen of specified menu.
For information on how to check the display contents and the rest of the procedure, refer to the following.
➠
For the test of the displayed data, refer to the following.
➠
• Change current value of buffer memory
• Turn output signal from PLC CPU on and off
8 - 32
8.4 Operation of Each Intelligent Module Monitor Screen
8.4.1 Composition of the system configuration screen and key functions
3. DEVICE MONITOR
8.6 Operating I/O Module Monitor Screen
8.5 Intelligent Module Monitor Screens
8.4.7 Testing of the intelligent function module