Select Connection Destination (Servo)] Window - Mitsubishi Electric GOT2000 Series User Manual

23.4.11 [Select connection destination (servo)] window

Set a servo amplifier from which data is read.
1)
2)
4)
5)
When connecting a servo amplifier
through a motion controller CPU
1) [Via]
Select the type of a controller through which a target servo amplifier is connected to the GOT.
The following shows the items to be selected.
• [Motion CPU]
• [Simple motion]
2) [CPU No.]
This item is displayed when [Motion CPU] is selected for [Via].
Select the CPU No. of a motion controller CPU through which a target servo amplifier is connected to the GOT.
3) [First I/O]
This item is displayed when [Simple motion] is selected for [Via].
Select the start I/O No. of a simple motion module through which a target servo amplifier is connected to the
GOT.
4) [Axis]
Select an axis from which data is read.
5) [OK] key
Confirms the settings that specify a servo amplifier to be connected.
Touch the [Read] key on the [Drive recorder information list] screen to read drive recorder information from the
set axis.
1)
3)
4)
5)
When connecting a servo amplifier
through a simple motion module
23.4 [Drive recorder information list] screen
23
23 - 15