Mitsubishi Electric GOT2000 Series User Manual page 543

9) Monitor screen
The position display, alarm diagnosis, tool compensation parameter, and program functions, which are
equivalent to the MELDAS dedicated display, are available.
The graphic trace function and ladder edit function are not available.
The [Menu1] to [Menu5] keys switch the monitor screens that correspond to each item in the menu.
When the above screen is displayed, touching each key displays the following contents.
When the CNC-dedicated HMI is enabled, the message [Other display operating] and [Key operation right]
menu appear.
To operate the keys with the GOT, select the [Key operation right] menu.
Item
[Menu1] key
[Menu2] key
[Menu3] key
[Menu4] key
[Menu5] key
10) Next page key
Displays the next page when multiple pages exist on the display screen.
11) Previous page key
Displays the previous page when multiple pages exist on the display screen.
12) Software key board
Used to configure the data setting on the monitor screen.
Item
Alphanumeric and symbol keys
Cursor movement keys
[INS] key
[DEL] key
[CAN C-B] key
[EOB] key
[Input] key
[SHIFT] key
Position
Coordinate
Command
Program search
Menu switching
Input alphabets (capital letters only), numbers, spaces, and symbols.
To input a symbol displayed in gray, touch the [Shift] key and then the symbol key.
Move the cursor (The repeat function is enabled.).
Switches the insert mode.
Deletes one character at the cursor position.
Deletes one block while editing the machining program.
To delete all the blocks displayed on the screen, touch the [Shift] key and then the [CAN C-B]
key.
Inputs EOB (;) to the machining program.
Confirms the input.
Switches the key functions.
Description
Description
17.4 Operation Procedures
17
17 - 7