Test Operation; How To Operate Device Test Window - Mitsubishi Electric GOT2000 Series User Manual

4.9

Test Operation

In the device test mode, device values can be changed on the screen.
For setting the device test mode, refer to the following.
➠
The test operation of devices is available by touching devices on the following screens in the device test mode.
Ladder monitor screen
Touching a device displays the device test window.
• When touching bit devices
A bit device is switched between ON and OFF states in the device test window.
• When touching word devices
The GOT writes the value input in the device test window into the selected word device.
4.9.1

How to operate device test window

■1. Bit devices
(1) Displayed screen
The following table shows the displayed contents.
No.
1)
2)
(2) Key functions
Key
[X]
[ON]
[OFF]
4 - 54
4.9 Test Operation
4.6.2 Key functions
Screen applicable to device test mode
POINT POINT POINT
Displaying the device test window when setting the security
By setting the security on GT Designer3 (GOT2000), the display of the device test window can
be limited.
For the security setting, refer to the following.
➠ 4.3.4 Setting the security
1)
Item
Device Displays the selected device.
Keys Keys for operations in the device test window shown in (b).
Closes the device test window.
Turns on the bit device and writes the device state to the PLC CPU.
Turns off the bit device and writes the device state to the PLC CPU.
2)
2)
Description
Function
Reference section
4.6.2