Operation For Display - Mitsubishi Electric GOT2000 Series User Manual

11.3 Operation for Display

This section explains how to display the MELSEC-L troubleshooting screen after the GOT is turned on.
Set the channel No., network No.,
station No., of the LCPU connected
*2
to the GOT.
The MELSEC-L troubleshooting starts.
*1 For how to display the utility, refer to the following.
➠
*2 For the details, refer to the following.
➠
*3 For the details, refer to the following.
➠
Turn on the power to the GOT
Starting from the utility
*1
Display the utility.
After the utility is displayed,
touch [Monitor] → [MELSEC-L troubleshooting]
from the Main Menu.
*3
GOT2000 Series User's Manual (Utility)
11.2.2 ■2. (1) Communication setting window
11.4 Operation Procedures
POINT POINT POINT
(1) How to display the utility
For how to display the utility, refer to the following.
➠
GOT2000 Series User's Manual (Utility)
(2) Displaying communication setting window
After turning on the GOT, the communication setting window is displayed at the first startup of
the MELSEC-L troubleshooting only.
For displaying the communication setting window at the second or later startup, touch the
[ChNET PLCNo] button on the MELSEC-L troubleshooting screen.
➠
11.4 Operation Procedures
Start
Communication setting window
End
11.3 Operation for Display
11
11 - 3