10.3.4
Network batch backup/restoration
The backup/restoration can be executed to multiple controllers on the network system.
Batch backup/restoration for
controllers on the network
To backup or restore multiple controllers on the network, create a controller list file.
■1. Flow to perform the network batch backup/restoration
Create a controller list file with a personal computer.
Store the controller list file in the BKUPLIST folder.
Install a SD card or USB memory, in which the controller list file is stored, on
the GOT.
Display the Main Menu of backup/restoration
Select a channel to be backed up or restored.
Execute the backup/restoration.
For the operation after executing the network batch backup/restoration, refer to the following.
➠
■3. Operation after executing the network batch backup or restoration
POINT
POINT
POINT
Before performing network batch backup/restoration
When backing up or restoring to controllers on the network, set the parameters to the controllers
for communicating with the GOT.
If the controller cannot communicate with the GOT, the backup/restoration cannot be performed.
For how to connect controllers with the GOT, refer to the following.
➠
GOT2000 Series Connection Manual (Mitsubishi Products) For GT Works3
Version1
↓
↓
↓
↓
↓
NW No. : 1
Station No. : 2
NW No. : 1
Station No. : 1
CC-Link IE Field Network
Inverter
➠
■2. Creating a controller list file
➠
■2. Creating a controller list file
➠
GOT2000 Series User's Manual (Utility)
➠
10.3 Operations for Display
➠
10.4.1 Main menu
➠
10.4.1 Main menu
10.3 Operations for Display
NW No. : 1
Station No. : 3
Ethernet
Servo Amplifier
10
10 - 39