Mitsubishi Electric GOT2000 Series User Manual page 552

14) [Disp Filename] key
Changes the display contents in the list each time the key is touched.
The display contents depend on the item selected with the [Device] key.
• When [CNC] is selected
The contents can be switched only when [Machine program] is selected with the [Directory] key.
The following shows the contents to be switched.
• When an item other than [CNC] is selected
The following shows the contents to be switched.
15) [Exec] key
Executes the settings.
■2. Copy
Files can be copied between [CNC] of the monitoring target and data storage.
Select a copy source and copy destination as follows.
Copy destination
When [CNC] is selected for the copy source, only the data storage can be selected for the copy destination.
Also, when a data storage is selected for the copy source, only [CNC] can be selected for the copy destination.
The following describes the copy procedure.
Example)
When copying the machining program [1.PRG] of [CNC] into [A:Standard SD card]
Step 1.
Touch the [Function] key to display the function selection window.
Step 2.
Touch the [Copy] key on the function selection window.
18 - 8
18.4 Operation Procedures
File name and comment
File name File name and file size
Copy source
1. 1. 1.
File name and number of characters
File name and date and hour
2. 2. 2.