File Switching For Comment Display ([Change Comment]) - Mitsubishi Electric GOT2000 Series User Manual

3.3.11

File switching for comment display ([Change comment])

The comment file to be displayed can be switched.
This function cannot be used with the BM monitor.
■1. Comment files that can be displayed with the device monitor
With the device monitor, comment files used for the sequence program monitor (ladder) can be displayed.
The following lists the types of comment file that can be displayed.
• Common comment files
• Comment files for the target programs for monitoring
The comment files can be displayed only when the local device monitor or TC monitor is used.
• All the comment files stored in a data storage installed on the GOT
The comment files can be displayed only when the local device monitor or TC monitor is unused.
• Comment files specified with the parameters of PLCs
The comment files specified for [Comment File Used in a Command] of the PC parameter with GX Works2 or GX
Developer are displayed.
■2. Procedure for switching
The entry monitor is taken here as an example to describe the procedure for switching comment files.
Step 1.
Touch the [Comment] key.
[Change comment] key
Step 2.
The comment file list dialog appears.
Select the comment file to display and touch the [Change] key.
1) [Comment list]
Lists the comment files displayed with the device monitor.
A file can be selected by touching the file name.
2) [Cancel] key
Closes the comment file list dialog.
3) [OK] key
Closes the comment file list dialog and displays the selected comment file.
When four screens are displayed and a comment file is set for one of the four screens, the comment file is also
set for other screens connected to the same monitor target and no comment file is set for.
Step 3.
The comment file on display is switched.
1)
3.3 Operations Common to the Monitor Screens
2)
3)
3
3 - 33