2.3
Operations for Display
This section explains how to display the system launcher screen after the GOT is turned on.
Step 1.
Turn on the GOT.
Step 2.
Display the system configuration screen by one of the following methods.
• Starting from the special function switch (System launcher) set in the project
For how to set special function switches, refer to the following.
➠
• Starting from the utility
In the utility, touch [Monitor] → [System launcher] from the main menu.
For how to display the utility, refer to the following.
➠
Step 3.
The [Select channel] window appears only at the first startup of the system launcher.
Set the channel number of the PLC connected to the GOT.
When the channel number is not set, touching the [×] key closes the [Select channel] window and sets the
channel number to [1].
Step 4.
The system configuration screen appears.
To change the connection destination, touch the select channel key on the system configuration screen.
➠
2 - 4
2.3 Operations for Display
GT Designer3 (GOT2000) Screen Design Manual
GOT2000 Series User's Manual (Utility)
2.4 Operating Procedure
Select channel key
[Select channel] window