Mitsubishi Electric GOT2000 Series User Manual page 205

6.4.2 Detailed monitor
This section describes the detailed monitor and the common operations used when executing the line monitor.
■1. Display contents and keys functions: acting as a MELSECNET/H or MELSECNET/10
Control station/normal station
This section describes the contents of the detailed monitor and the function of on-screen keys. All these are displayed
and used when the host acts as the control station/normal station on the MELSECNET/H, MELSECNET/10.
(1) Displayed contents
1) [TsSt' Info]
The following shows the display items.
[This Station's #]
[Network #]
[Group #]
2) [Ctrl St Info]
The following shows the display items.
[Spc Ctrlr Sta]
[Curr Ctrl Sta]
[Com Info]
[SubCtrl Sta Com]
[Rmt I/OMstSt]
3) [D-Link Info]
The following shows the display items.
[Total of L-Sta]
[Largest Nrm Sta]
[Largest DL-Sta]
1)
2)
3)
Item
Indicates the station number of the host.
Indicates the network number.
Indicates the group number.
Item
Indicates the station number of the station that is specified as a control station.
Indicates the station number of a station that is currently acting as the control station.
Indicates whether the host is communicating with the control station or the sub-control station.
Indicates whether there is a sub-control station link.
Displays the station number of the remote I/O master station for X/Y communication block1
and block 2.
Displays "None" when there is no setting.
This is not displayed when the CPU type of the GOT connection target is AnNCPU or
AnACPU
Item
Indicates the maximum number of the communication stations that is defined with common
parameters.
Indicates the maximum station number of the station performing a communication in a normal
condition.
Indicates the maximum station number of the station that is data-linked.
4)
5)
6)
Description
Description
Description
6.4 Operation Procedures
6
6 - 17