File Name] Window - Mitsubishi Electric GOT2000 Series User Manual

23.4.5

[File name] window

Name a file and save it in the specified format.
1) File name
Set the name of the file to be created.
Make sure that the path (including the file extension) consists of 78 characters or less.
For the restrictions on the folder and file names used with the GOT, refer to the following.
➠
When the [File name] window is displayed with the [Save all] key, all the data collected at alarm occurrences
are saved in files (*.gpf2 or *.amo2) by alarm basis.
The date and time at which drive recorder information was read to the GOT and an alarm history number
(indicating the occurrences of alarms in reverse chronological order) are appended to each file name.
Example) Waveform data (*.gpf2)
File name_yyyymmdd_hhmmss_**.gpf2
2) [Format]
Select a file format.
The following shows the items to be selected.
• [gpf2 (graph)]
• [amo2 (onset data)]
When the [File name] window is displayed from the [Graph waveform] screen or the [(At alarm occurrence)]
screen, the file format is fixed.
3) [OK] key
Saves the file.
23 - 12
23.4 [Drive recorder information list] screen
1)
2)
GT Designer3 (GOT2000) Screen Design Manual
Date and time at which drive recorder information was read
3)
Alarm history number