Mitsubishi Electric GOT2000 Series User Manual page 259

6) [Print Screen] key
Stores the displayed screen to the SD card in the BMP or JPEG format.
For further information about hard copies, refer to the following:
➠
7.4.12 Hard copy output
7) [Cancel Print]
The touch operation of this key is invalid.
■2. Inputting the password
If you have set a password in [Motion Parameter Display] on GT Designer3 (GOT2000), the password input key
window appears when you try to access the parameter setting screen of the motion monitor.
For the details of the password setting, refer to the following.
➠
GT Designer3 (GOT2000) Screen Design Manual
(1) Function
• If the password matches, the parameter setting screen is displayed.
• If the password does not match, an error message is displayed.
Touching the [Sys. Conf] key returns to the System Configuration screen.
• Up to 8 characters (A to F, 0 to 9) can be used for the password setting.
(2) Operations
Enter a password.
Touch the key window and enter a password.
After entering the password, touch the [Enter] key to set the password.
To edit the input characters, touch the [Del] key to delete the characters, and then input the new characters.
To cancel the password entry, touch the [×] key to return to the monitor screen.
7.4 Operation Procedures
7
7 - 27