Executing The Monitor - Mitsubishi Electric Fatec GOT2000 Series Basic Training Textbook

4.5.2

Executing the monitor

Operate the screen written to the GOT, and monitor the PLC.
GOT Operation Image
Displays the value of D100.
Adds to the value of D100.
Sets the value of D100 to the
number displayed on the switch.
Displays errors and error codes
when a malfunction occurs in
GOT or CPU.
(1) Monitoring/changing the bit device (Y70, Y71) values
4 - 30
4. From GOT screen creation up to the test
4.5 Checking whether data has been properly transferred to the GOT
1.
When the [Y71 ON] switch is touched, the
Y71 becomes ON.
2.
When the [Y71 OFF] switch is touched, the
Y71 goes OFF.
2.
1.
3.
Each time the [Y70 ON/OFF] switch is
touched, the Y70 goes ON/OFF.
3.
Lamp is lit when Y70 is
turned ON.
Lamp is lit when Y71 is
turned ON.
Turn Y71 OFF.
Turn Y71 ON.
Switches Y70 ON
or OFF each time
Y70 is touched.