Monitor Menu Screen - Mitsubishi Electric GOT2000 Series User Manual

(2) Key functions
1) [×] key
Closes the communication setting window.
When any of the CH No., network No., station No., and CPU No. is not input and the monitor target is not set,
the communication setting window does not close.
2) Input area movement key
Moves the cursor among the input areas.
3) [Enter] key
Moves the cursor when the cursor is in the CH No. input area, network No. input area, or station No. input area.
When the cursor is in the CPU No. input area and settings for the CH No., network No., and station No. are
completed, the communication setting window closes and the PLC read screen appears.
4) [Del] key
Deletes an input value or character.
5) [AC] key
Deletes all the input values and characters.
7.4.3

Monitor Menu screen

The Q motion monitor allows you to monitor various servo monitor data on multiple monitor screens.
To display any of the monitor screens, make a selection on the monitor menu screen.
1) [Present Value Mon.] key
Monitors and displays the feed current values and actual current values of all running axes.
➠
2) [SFC Error History] key
Displays the history of errors that occurred in SFC programs from when the motion CPU was powered on or
reset.
➠
7 - 12
7.4 Operation Procedures
1)
2)
3)
4)
7.4.4 Present Value Monitor screen
7.4.5 SFC Error History screen
1)
2)
3) 4) 5)
5)
6)
7)