Operation Procedures; Sfc Diagram Monitor Screen - Mitsubishi Electric GOT2000 Series User Manual

14.4 Operation Procedures

This section describes the display contents of the SFC diagram monitor screen and the functions of the keys displayed on
the screen.
14.4.1

SFC diagram monitor screen

■1. When the SFC diagram monitor is executed
(1) Display screen
2)
3)
4)
2)
No. Item
1) Target controller display area
2) Keys
3) Program switching tab
4) SFC diagram display area
5) Message display area
Automatic scroll status
6)
display area
1)
5)
Displays CH No., network No., station No., and CPU No. of the motion controller CPU
set as the target.
• CH No. network No.-station No./CPU No.
Keys for operations on the SFC diagram monitor screen.
Displays the program name of the program displayed in the SFC diagram display area.
Touching a tab displays the corresponding program in the SFC diagram display area.
Tabs displayed to the right of the touched tab are removed.
If the detailed program window is open, the tabs will be closed.
Displays the SFC diagram of the motion SFC program.
Active steps are displayed in yellow, and waiting steps are displayed in red.
The locked step or transition is shown as below.
• Inactive : Gray
• Active : Pongee
• Waiting : Dark red
For displayed motion SFC diagram symbols, refer to the following.
➠
(2) Motion SFC diagram symbol
The followings can be selected in the SFC diagram display area.
• Valid/invalid of comment display
• Valid/invalid of automatic scroll
➠
(2) Menus(b) Display menu
Displays error messages and others.
Displays [Scrolling automatically] when the automatic scroll mode is valid.
Nothing is displayed when the automatic scroll mode is invalid.
When the automatic scroll is valid, the automatic scroll turns invalid by touching the
automatic scroll status display area.
2)
6) 7)
Display contents
14.4 Operation Procedures
14
14 - 9