Mitsubishi Electric GOT2000 Series User Manual page 516

■1. Changing screens
user-created monitor screen
END
System Configuration screen
Sys. Conf
END
Monitor menu screen
Mon. Menu
Monitor screen of selected function
At next startup, the last exited screen is displayed.
However, the last exited screen will not be displayed when the GOT is restarted after package data is written or the
GOT is powered on, off, or reset.
When the function is started with a special function switch to which a connection destination different from the one at
the last exit is set, the system configuration screen appears.
16 - 6
16.3 Operations for Display
Start
Utility Main Menu
or
Communication
setting window
(Select the motion controller
CPU to be monitored.)
Motion Monitor
(Menu selection)
END
Ch:
Sys. Conf
Password input key window
Sys. Conf
Parameter setting screen
END
Parameter Set.
END