Graph Waveform] Screen - Mitsubishi Electric GOT2000 Series User Manual

23.5 [Graph waveform] screen

This screen displays the drive recorder information in waveform.
2)
11)
12)
13)
12)
1) Alarm information
Information on the alarm being displayed
When data is read from a servo amplifier, an alarm number is displayed.
When data is read from a file, the name of the file is displayed.
2) [Open] key
Displays the [Open] window.
Open a drive recorder information file.
➠
23.4.1 [Open] window
3) [Save] key
Displays the [File storage destination] window.
The displayed waveform data can be saved as a file.
➠ 23.4.3 [File storage destination] window
Data read from a file cannot be saved.
4) Scale optimization key
Returns the enlarged or repositioned graph display area to its original state when the [Graph waveform] screen
was displayed.
5) Zoom in mode key
Enables or disables the zoom in mode for waveform data.
While using the zoom in mode, you cannot enable the move mode.
➠
23.5.2 ■1. Zoom in mode
6) Move mode key
Enables or disables the move mode for waveform data.
While using the move mode, you cannot enable the zoom in mode.
➠
23.5.2 ■2. Move mode
7) Cursor key
Displays or hides cursors on the graph display area.
To display the maximum and minimum values within a range, use the cursors to define the range.
➠ 23.5.2 ■3. Cursor display
1) 3) 4) 5) 6)
17) 18)
7) 8) 9) 10)
17)
23.5 [Graph waveform] screen
14)
15)
16)
23
23 - 17