Mitsubishi Electric GOT2000 Series User Manual page 562

Step 5.
Input "SAMPLE.PRG".
Touch the [ENTER] key. The key window closes and the copy confirmation window appears.
Touching the [OK] key starts copying the file with the new file name.
When the copy is completed, a completion message is displayed.
■7. Contents displayed in the list
The following describes the file names displayed in the list of the CNC data I/O screen.
Target data
*1*2
Machining program
*3
Parameter
Tool offset data
Workpiece offset data
Common variable
Maintenance data
Cycle monitor data
*1
*2
*3
18 - 18
18.4 Operation Procedures
Machining program
Parameter
Tool offset data
Workpiece offset data
Common variable
CNC ladder
R resister data
C resister data
T resister data
Operation history data
CNC sampling data
SRAM data files
Sampling related package file
Sampling setting file
PLC data collection setting file
PLC draw setting file
PLC collection data file
CNC collection data file
When the base specifications parameter of #1166 fixpro is set to 1, the fixed cycle program is the target data.
When the CNC has machining programs, ALL.PRG is displayed at the top of the list.
When the software version of the CNC is earlier than D1, machining programs cannot be compared.
When the software version of the CNC is earlier than D1, the parameter files in type ll cannot be compared.
Description File name displayed in the list
ALL.PRG, O_.PRG
ALL.PRM
TOOL.OFS
WORK.OFS
COMMON.VAR
USERPLC.LAD
RREG.REG
CREG.REG
TREG.REG
TRACE.TRC
NCSAMP.CSV
SRAM.BIN
ALL.SMP
SAMPLING.PRM
FLCSAMP.CTF
PLCSAMP.MMG
PLCSAMPH.CSV
NCSAMPH.CSV