Hard Copy Output - Mitsubishi Electric GOT2000 Series User Manual

■2. Displays and key functions
The following describes the displays for the list monitor.
No Item
1)
List display area
2) Keys
3) [×]
*1 The status of contacts and coils is displayed as below.
Type of instructio
LD, AND, ORC(ontact instruction (Normal open))
LDI, ANI, ORI(Contact instruction (Normal close))
OUT, SET
RST
MC, STL
LDP, ANDP, ORP, LDF, ANDF, ORF
(Rise or fall contact instruction)

15.4.13 Hard copy output

Screens of the MELSEC-FX list editor can be stored to a data strage in BMP/JPEG file format.
Refer to the following for the hard copy.
• Starting the MELSEC-FX list editor from the FX ladder monitor
➠
13.4.2 Hard copy output
• Setting the hard copy with GT Designer3 (GOT2000)
➠ GT Designer3 (GOT2000) Screen Design Manual
1)
*1
The status of contacts and coils is displayed on the left of device displays.
The same operations as in the READ mode of the FX list editor can be executed.
➠
15.4.3 Sequence program display
Ends the list monitor.
When the list monitor is executed on the FX list editor screen, the screen is switched to the
FX list editor screen.
Contact
Contact
TC: Coil
Except TC: Contact
TC: Reset
Word device
Except TC and word device:
Contac
Contact
Not monitored
3)
2)
Display contents
Description
■ Displayed
ON
OFF
ON
ON
ON
Value: 0
OFF
ON
15.4 Operation Procedures
Status
■ Not displayed
OFF
ON
OFF
OFF
OFF
Value: Except 0
ON
OFF
Always ■ not displayed
15 - 27
15