Mitsubishi Electric GOT2000 Series User Manual page 442

■2. Searching operation
The following explains the procedure from touching the Key Code Switch for advanced alarm display or Special
Function Switch and performing coil-search or defect search to display of a ladder block.
Step 1.
Touch a key in monitor screen.
Step 2.
After the read program is searched, the result is displayed.
Step 3.
Touching the
Touching the [Exit] button completes searching halfway.
Step 4.
If the searched device is not found in the read program, the message "DEVICE NOT FOUND" appears and
searching is completed.
After searching, the program that has been read first is displayed on the FX ladder monitor screen.
13 - 10
13.3 Operation for Display
button searches consecutively.
When the searched
device is found
When the searched
device is not found
The ladder
monitor screen
is displayed.*
After coil-search, monitoring of the displayed ladder starts
*
automatically.
Equipment
Touch
Exit
The user-created
screen is
displayed.