Mitsubishi Electric GOT2000 Series User Manual page 338

12) [Print Screen] key
Stores the displayed screen to the SD card in the BMP or JPEG format.
For further information about hard copies, refer to the following:
➠
13) [Cancel Print] key
The touch operation of this key is invalid.
(3) Operation
(a) MELSERVO-J2-Super series and MELSERVO-J2 series
• Start operation
Touch the [Forward] or [Reverse] key
To resume operation that has been paused, touch the [Forward] key to resume forward rotation or the
[Reverse] key to resume reverse rotation.
• Stop operation
When the set distance has been reached, operation stops.
Touching the [Pause] key pauses the operation.
If touch the [Pause] key again after the operation is paused, the remaining distance is erased.
(b) MR-J3-□A and MR-J4-□A
• Start operation
Touch the [Forward] or [Reverse] key.
To resume the operation that has been paused, touch the [Restart] key to resume the rotation.
• Stop operation
When the set distance has been reached, operation stops.
Touching the [Pause] key pauses the operation.
If touch the [Clear] key again after the operation is paused, the remaining distance is erased.
■6. Motor-less operation screen
The following describes the display data of the motor-less operation screen and the key functions displayed on the
screen.
(1) Displayed contents
9 - 38
9.4 Operations of Servo Amplifier Monitor Screens
9.4.8 Hard copy output
POINT POINT POINT
Start and end of the motor-less operation with MR-J4-□A.
Changing the parameter PC60 (*COPD) starts and ends the motor-less operation.
PC60 (*COPD) can be changed by [Ext. setting] in the parameter setting screen.
➠
9.4.6 ■2. Parameter setting screen
• Start:
After setting PC60 (*COPD) to 1, turn on the servo amplifier again.
• End:
After setting PC60 (*COPD) to 0, turn on the servo amplifier again.