■1. Deleting specific ladder data
You can delete specific ladder data from the ladder monitor screen.
For the details, refer to the following.
➠
13.3 Operation for Display
13.3.2
Searching from the monitor screen
When starting an FX ladder monitor with object, coil-search/defect search can be automatically performed to the read
sequence program and the result can be displayed on the monitor.
■1. Usable objects and functions list
The following table shows the types of objects can be searched from a monitor screen and functions usable in each
object.
For object setting to display searching result on ladder monitor, refer to the following manual.
➠
GT Designer3 (GOT2000) Screen Design Manual
(○: Applicable ×: Inapplicable)
Object
Special Function Switch
Alarm Display
Simple Alarm Display
POINT
POINT
POINT
Reading the PLC in the following operations
Once the PLC is read, you do not have to read it in the following operations.
However, it must be re-read after you read it and then downloaded project data and when the
power to the GOT is turned on again.
POINT
POINT
POINT
Deleting ladder data
Ladder monitor data is deleted every time the GOT is restarted.
Ladder data cannot be saved.
Automatic PLC read
×
×
×
Function
Specify Search File
Coil
×
×
×
13.3 Operation for Display
Factor
○
×
○
×
○
×
13 - 9
13