Mitsubishi Electric GOT2000 Series User Manual page 596

Graphic operation terminal

Hide thumbs Also See for GOT2000 Series:

Table of Contents

(2) Data link information

[D-Link Boot Status]

[Error Status]

21.4 Display Contents

Displays the data link startup status.

• [D-Link in prog.]: Data link being executed

• [D-Link Offline]: Data link stopped

• [Initialize]: Set to the initial status

• [Parameter wait]: Parameter not received

• [Disconnect (No Polling)]: In cut-off status with no inquiry from master station

• [Disconnect (Line Err)]: In cut-off status due to line error

• [Disconnect (Other)]: In cut-off status due to other causes

• [Testing Line]: Line test being executed

• [Testing Pram Setup]: Parameter setting test being executed from master station

• [Auto Reconnecting]: Return processing being executed automatically

• [Reset. in prgr.]: CC-Link communication unit being reset (GOT reset status)

Displays the status of the current error.

• [Normal]: Normal status

• [Invalid TransPath]: Transmission path error detected

• [Invalid Parameter]: Parameter error detected

• [CRC Error]: Receive data error detected

• [Time Out Error]: Timeout error detected in data reception

• [Abort Error]: Error detected in data communication

• [Invalid Setup]: Invalid station number, station type, transmission speed, or mode setting detected

• [Other Abnormality]: Error due to some other cause detected